Page 187 - FAH23R Architectural Hardware Catalog

ARCHITECTURAL HARDWARE GLASS ENTRANCE SYSTEMS SECTION 6

FHC Glass Tools, Supplies and Equipment

®
Makita 10" Compound Miter Saw Makita 10" x 5/8" Arbor
®
- Powerful 110 Volt 15 AMP - Positive Miter Stops at 9 80 Tooth Saw Blade
Direct Drive Motor for Settings: 15°, 22.5°, 30°,
Improved Performance; 45° Right or Left and 0° - Tungsten Carbide
4,600 RPM (90° cuts) Tipped Blades
- Miter Cuts 0°-45° Left and - 4,600 RPM - Micro-Polished
0°-52° Right
- Fine Crosscutting
- Bevel Cuts up to 45°
to the Left - 5,870 Maximum RPM
- 5/8" Arbor ITEM NO. A93681
Minimum Order 1 Each

FHC Wax Lube
- Improves Saw Blade, Drill Bit and
Sanding Belt/Disc Performance
ITEM NO. CMS1040 - Reduces Friction to
Minimum Order 1 Each Increase Working Life
- Helps Keep Cutting
Surfaces Sharp ITEM NO. TW535
and Rust Free
Minimum Order 1 Each

FHC GMT Power Tip Granite,
Marble, and Tile Drill Bit
INSTALLER'S
FAVORITE

®
Makita 1/2" Spade Handle - Effectiveness on Porcelain Tile Has Made ITEM NO. SIZE
these Bits a Favorite With Glaziers GMT18 1/8" x 3"
Heavy-Duty Drill - Specially Designed Carbide Tip for Stone, GMT316 3/16" x 4"
Ceramic and Porcelain Tile GMT14 1/4" x 4"
- 110 Volt 8.5 AMP Motor - Designed to Be Used With Light-Duty GMT38 3/8" x 4-3/4"
with Variable Speed Hammer and Rotary Drill Motors
Minimum Order: 1 Each.
- Variable Speed (0 – 600
RPM) for Mixing and
Drilling in a Wide Variety FHC Heavy-Duty Masonry Drill Bit
of Materials
- Forward and Reverse
Lever for Operator
Convenience
- Rubberized Grip for - For Use in Concrete, Cement,
Comfortable Use Brick and Stone ITEM NO. SIZE
- Includes Drill Chuck, - Available in Four Sizes MDB2 1/8" x 2-15/16"
Chuck Key and MDB3 3/16" x 3-7/8"
Side Handle MDB4 1/4" x 3-7/8"
MDB6 3/8" x 5-7/8"
Minimum Order: 1 Each.
ITEM NO. DS4012
®
Minimum Order 1 Each Hilti TE-CX Carbide Head Hammer Drill Bit

- Concrete and Masonry Drill Bit ITEM NO. SIZE
- Used to Drill Anchor Holes in Reinforced TECX14 1/4" x 8"
and Unreinforced Concrete
TECX38 3/8" x 12"
- Can Also Drill Holes for Post-Installed TECX12 1/2" x 12"
Rebar Connections
Minimum Order: 1 Each.
- Tungsten Carbide Head
- Four Cutting Edges
Makita is a registered trademark of Makita Corporation. Hilti is a registered trademark of Hilti Aktiengesellschaft Corporation.
visit fhc-usa.com to search for 4361 Firestone Blvd. South Gate, CA 90280
Tools Toll Free: (888) 295-4531 | Direct: (323) 968-2031
4361 Firestone Blvd. South Gate, CA 90280
Toll Free: (888) 295-4531 | Direct: (323) 968-2031
or enter the Item Number or scan QR code with Fax: (323) 336-8307 | fhc-usa.com
your smartphone for complete product details Fax: (323) 336-8307 | fhc-usa.com 181