Page 33 - FSH24 Frameless Shower Door Hardware and Supplies

FRAMELESS SHOWER DOOR HINGES SECTION 1
Valore HD 2-5/8"

Heavy-Duty Frameless
Shower Door Hinges

- For 3/8" to 1/2" Tempered Glass F O R H E AV I E R A N D W I D E R D O O R S
- For Heavier and Wider Doors, ITEM NO. VALF1XX
Maximum 145 Pound Rating Wall Mount
Full Back Plate Hinge
- Square Profile Wall Mount and Standard Closing Position
180 Degree Glass-to-Glass Models 4-3/8"
- Seven Popular Finishes
- Self-Centering Within 15 Degrees
of Closing Position
- Solid Brass Construction
- Commonly Used in Residential Bath
and Commercial Hotel Applications

2-5/8"

SHOWER HINGE TEMPLATE PROFESSIONAL GRADE
VALORE HD
Wall Mount Hinge 2-1/2"
ITEM NO. VALF1 40"
MAX
WIDTH
SPECIFICATIONS
Glass Sizes: 3/8" or 1/2" (10 or 12 mm) Tempered Glass Only
Construction: Solid Brass 2-HINGES
Closing Type: Full Rotation and Self-Centering
When Within 15 Degrees of Closed Position
Cutout Required: Cutout No. SD48
Includes: Hinge body, glazing gaskets, mounting screws, allen 145 MAX
head/phillips head cover plate screws, and fabrication template. 4-3/8" LBS ITEM NO. VAL180XX
Use: Residential Bath and Commercial Hotel Applications
SEE TEMPLATE ON BACK
4-3/8"
Refer to Dimensions Shown
GASKET SPECIFICATIONS: to Ensure Accuracy 180 Degree
For 3/8" (10 mm) Glass: Use One Thick Gasket On Each Side
For 1/2" (12 mm) Glass: Use One Thin Gasket On Each Side
GLASS INSTRUCTIONS:
Only use tempered safety glass. To prevent damage to the hinge finish 2-5/8" Glass-to-Glass Hinge
during installation, do not use power tools when installing these hinges. 7/16"
IMPORTANT INFORMATION:
The Valore Series hinge has a dual degree pivot pin. It comes factory set F O R H E AV I E R A N D W I D E R D O O R S
at 90 degrees for normal door closing applications. There is also a secondary
setting on the hinge pivot pin that can be field adjusted to allow an additional CARE & CLEANING GUIDELINES: Standard Closing Position
For best results, keep the following recommendations in mind when caring for your FHC shower door hardware.
5 degrees of closing for jobs that require a firmer positive position against a
jamb or seal. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh
SHOWER HINGE TEMPLATE
cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will PROFESSIONAL GRADE
become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning
the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely
with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle,
VALORE HD
cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.
Wall Mount Hinge DO NOT MEASURE / SCALE DRAWING
MAINTENANCE: ITEM NO. VALF1 USE DIMENSIONS SHOWN
FHC’s hinges come factory greased for a silent, hassle-free experience. 2-1/16"
3/8" (10 mm) GLASS 1/2" (12 mm) GLASS If there is any noticeable squeaking that occurs after installation it is recommended (53 mm) 4-3/8"
MAXIMUM DOOR EDGE OF GLASS Cutout No. SD48
CAPACITY
WIDTH
WEIGHT
location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning
WIDTH
WEIGHT
USING 2 HINGES 145 LBS. (65 kg) 40" (1016 mm) 145 LBS. (65 kg) 40" (1016 mm) grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge 3/16" IMPORTANT:
to lubricate the interior hinge components.
to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot (5 mm)
NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges. is disassembled during maintenance, use a small amount of white lithium grease 1-11/16" 3/8" Measure from Finished
(43 mm) (10 mm) Edge of Glass
FRAMELESS HARDWARE COMPANY
FRAMELESS HARDWARE COMPANY 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com THE GLAZING SUPPL Y COMP ANY
FHC-USA.COM
LIT0046 12.12.19 PG 1 OF 2
1-7/16"
(36.5 mm)
FRAMELESS HARDWARE COMPANY F O R H E AV I E R A N D W I D E R D O O R S
THE GLAZING SUPPL Y COMP ANY
framelesshardware.com C L CUT OUT Diameter Holes 3/4" (19 mm)
3-1/4"
(83 mm)
2-7/8"
(73 mm)
USE ONLY
MONOLITHIC
1-7/16"
(36.5 mm)
TEMPERED GLASS
EDGE OF GLASS 3/16" Call Toll Free in the U.S.
For Technical Support
(5 mm)
(888) 295-4531
FRAMELESS HARDWARE COMPANY NOTE: Dimensions
FRAMELESS HARDWARE COMPANY 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com THE GLAZING SUPPL Y COMP ANY
FHC-USA.COM
Shown are Similar for All
LIT0046 12.12.19 PG 2 OF 2
FRAMELESS HARDWARE COMPANY
THE GLAZING SUPPL Y COMP ANY Valore HD Series Hinges.
framelesshardware.com
Available Finishes * Available On Select Models Only
CH BN 0RB MB PN SB BBRZ
POLISHED BRUSHED OIL RUBBED MATTE POLISHED SATIN BRUSHED
CHROME NICKEL BRONZE BLACK NICKEL* BRASS* BRONZE*
MAXIMUM CAPACITY:
3/8" (10 mm) GLASS 1/2" (12 mm) GLASS
MAXIMUM DOOR Approx. 5 lb/ft 2 OR Approx. 6.4 lb/ft 2 INSTALLER'S FAVORITE!
CAPACITY
DOOR WEIGHT DOOR WIDTH FHC GMT Power Tip Drill Bits
Item No. GMT (See Page 142)
USING 2 HINGES 145 LBS. (65 kg) 40" (1016 mm)
NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.
Cut-Out Required: Specific Cut-Out Templates Available at fhc-usa.com.
Includes: Hinge, Glazing Gaskets, Wall Mounting Screws, Allen Head/
Phillips Head Cover Plate Screws, and Fabrication Template.
XX = FINISH
visit fhc-usa.com to search for
Valore 4361 Firestone Blvd. South Gate, CA 90280
Toll Free: (888) 295-4531 | Direct: (323) 968-2031
or enter the Item Number or scan QR code with
your smartphone for complete product details Fax: (323) 336-8307 | fhc-usa.com 031