Page 7 - WEB-S3 Sealants and Supplies

FHC SEALANTS AND SUPPLIES SECTION 1
FHC Sealants
Bulk Quantities Available
Click to Chat With Us
Professional Resources

and Information All Digital Resources

Download at FHC-USA.COM.
- SDS Safety Data Sheet Are Available to View or
- TDS Technical Data Sheet
- Sealant LEED Information
®
- Sealant Guidelines Comparison Chart

August 25, 2022
LEED® Information for Frameless Hardware Company LLC Sealants
Thank you for your inquiry regarding LEED® information for the products below
• Products listed below are manufactured at factory in Massillon, OH 44646. Confirm your site is
within a 500 mile radius of the manufacturing site.
• Locations of extraction for raw materials are spread throughout the United States, making it
impossible to single pin-point their locations.
• Sealants contains 0% pre & post-consumer recycled materials.
• Rapidly renewable content is not applicable.
• VOC contents are listed below (based on SCAQMD rule 1168), LEED® VOC limit is 250g/L
(IEQc 4.1).
ITEM DESCRIPTION VOC
S150 Silicone 30 g/L
S1000C TRU-CLEAR Silicone <36 g/L
S450 Industrial and Construction Silicone <29 g/L
S790 Silicone Building Sealant <29 g/L

P95 / P95S Modified Polyurethane Construction Sealant (Smooth) 9 g/L

P95TX Modified Polyurethane Construction Sealant (Textured) 9 g/L

S50 Acrylic Latex with Silicone 22 g/L
Conforms to OSHA HazCom 2012 Standard and WHMIS 2015

MM200 Mirror Mastic August 25, 2022 9 g/L SAFETY DATA SHEET
Section 1: IDENTIFICATION
1.1 PRODUCT IDENTIFIER Frameless Hardware Company LLC Sealants
LEED® Information for
Note: Further LEED® information is available on the U.S. Green Building Council website at usgbc.org
LEED is a registered trademark of the U.S. Green Building Council. Product Name: Silicone Sealant
Thank you for your inquiry regarding LEED® information for the products below
Product Code: Products listed below are manufactured at factory in Massillon, OH 44646. Confirm your site is
Cat. No. S150
•
within a 500 mile radius of the manufacturing site.
1.2 RECOMMENDED USE OF CHEMICAL AND RESTRICTIONS ON USE
• Locations of extraction for raw materials are spread throughout the United States, making it
Product Use: impossible to single pin-point their locations.
Sealant
• Sealants contains 0% pre & post-consumer recycled materials.
Rapidly renewable content is not applicable.
•
1.3 DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEETS
• VOC contents are listed below (based on SCAQMD rule 1168), LEED® VOC limit is 250g/L
Name/Address: Frameless Hardware Company FHC Sealant Guideline: Comparable Sealant Brands
(IEQc 4.1).
4361 Firestone Blvd
South Gate, CA 90280
ITEM
Telephone Number: DESCRIPTION 888-295-4531 VOC August 25, 2022 TECHNICAL DATA SHEET GLAZING SUPPLIES | SHOWER DOOR HARDWARE | ARCHITECTURAL HARDWARE | RAILING HARDWARE | STOREFRONTS & ENTRANCES | TRANSACTION HARDWARE | METAL EXTRUSIONS | DIACK STORE FIXTURES
S150 Silicone 30 g/L S150
1.4 EMERGENCY TELEPHONE NUMBER <36 g/L LEED® Information for Frameless Hardware Company LLC Sealants
S1000C
TRU-CLEAR Silicone
Emergency Telephone CHEMTREC 1-800-424-9300 (US and Canada) DESCRIPTION FHC CRL DAP DOW CORNING GE (MOMENTIVE) OSI PECORA SIKA SONNEBORN TREMCO
S450
Number: Industrial and Construction Silicone <29 g/L S150 is a one-component acetoxy silicone sealant. S150 provides excellent adhesion to common construction substrates SILICONES
INTERNATIONAL + 1-703-527-3887
Thank you for your inquiry regarding LEED® information for the products below
CCN1003004
S790 SiliconeBuilding Sealant <29 g/L such as tile, glass, and aluminum. S150 is not recommended for structural glazing, mirror installations, or aquariums. 999-A
Products listed below are manufactured at factory in Massillon, OH 44646. Confirm your site is
•
Section 2: HAZARD(S) IDENTIFICATION 9 g/L
P95 / P95S Modified Polyurethane Construction Sealant (Smooth) PHYSICAL PROPERTIES within a 500 mile radius of the manufacturing site. S150 33S 100% SILICONE 732 700 Glazing 1000 Contractors HM-270 860 863 SikaSil®-GP OmniPlus Proglaze
Tremsil 200
1200 Construction
Internal Method
< 15 minutes @ 70°F / 50% RH
TremPro 644
Modified Polyurethane Construction Sealant (Textured)
P95TX
Tack Free Time •
9 g/L
2.1 CLASSIFICATION OF THE CHEMICAL IN ACCORDANCE WITH PARAGRAPH (d) OF 29 CFR Skin Time Locations of extraction for raw materials are spread throughout the United States, making it General Purpose
Internal Method
< 45 minutes @ 70°F / 50% RH
impossible to single pin-point their locations.
Internal Method
Acrylic Latex with
S50
1910.1200 (OSHA HAZCOM2012) Silicone 22 g/L Cure Rate • Sealants contains 0% pre & post-consumer recycled materials. ¼” Bead in 48 Hours 786
EPA Method 24
Not a hazardous substance or mixture. 9 g/L VOC • Rapidly renewable content is not applicable. < 30 g/L, less water and exempt Solvents S150C 33SMRC Tub, Tile and 1700 Sanitary
MM200
Ceramic
Mirror Mastic
•
350 – 400%
Elongation @ Break VOC contents are listed below (based on SCAQMD rule 1168), LEED® VOC limit is 250g/L
ASTM D412
(IEQc 4.1).
2.2 LABEL ELEMENTS ACCORDING TO OSHA HAZCOM2012 100% Modulus of Elasticity ASTM D412 40 – 80 psi 799 Contractors
Note: Further LEED® information is available on the U.S. Green Building Council website at usgbc.org Shore A ASTM C661 20 ± 5 S450 RTV408 TITANIUM® Weatherproofing Silglaze II 2800 VP-275 896 SikaSil®-N Plus Tremsil 600
TremPro 645
Contactors-N 1800
Percent Solids Internal Method > 80% Siding & Door
Vinyl Windows,
ASTM D412
2.2a PRECAUTIONARY STATEMENTS Tensile Strength ITEM DESCRIPTION 160 – 200 psi VOC
LEED is a registered trademark of the U.S. Green Building Council. Sag/Slump S150 ASTM D2202 Minimal; < 0.2” 791 864 Spectrem 2
i.
PREVENTION
Use only outdoors or in a well-ventilated area.
30 g/L
UV Rating Silicone ASTM G154 No discoloration or change in appearance after 5000 hours S790 95C 795 Silpruf 895 SikaSil®-WS95 OmniSeal Spectrem 3
2.3 ADDITIONAL INFORMATION Service Temperature TRU-CLEAR Silicone -40 to 300°F <36 g/L POLYURETHANES
S1000C
Internal Method
S450 Industrial and Construction Silicone <29 g/L
2.3a Other hazards DIRECTIONS FOR USE Sikaflex® 1A
S790
<29 g/L
No data available Always do a test area to ensure product compatibility. The substrate must be clean and free of frost, oils, greases, or P95/P95S M64 Premium PR-255 Dynatrol® 1-XL Sikaflex® 201 US NP1 Dymonic
SiliconeBuilding Sealant
Sikaflex® 15LM
Polyurethane
Vulkem 921
Modified Polyurethane Construction Sealant (Smooth)
P95 / P95S
9 g/L
Section 3: COMPOSITION/INFORMATION ON INGREDIENTS incompatible sealers that may interfere with adhesion. Primers are not required for most substrates. Cut nozzle to Sikaflex® 219 LM TremGlaze U1400
desired bead size and apply with a caulking gun. Tool if necessary. Clean excess material with mineral spirits or similar
Modified Polyurethane Construction Sealant (Textured)
P95TX
9 g/L
solvent. P95PW M65W Side Winder® Pro-Sil 1 Sonolastic 150 TremGlaze 41600
S50 Acrylic Latex with Silicone 22 g/L
SHELF LIFE MM200 Mirror Mastic 9 g/L P95TX M66 Sikaflex® 201 Vulkem 116
S150 can be used up to 18 months from the date of manufacture if material has been stored in their unopened Textured TremPro 626
Page 1 of 13 container in a low humidity (< 50% RH) environment at room temperature (73 ± 2°F). ACRYLIC LATEX
Silicone Sealant
Note: Further LEED® information is available on the U.S. Green Building Council website at usgbc.org
Frameless Hardware Company specifically disclaims and makes no warranties, express or implied, about this product, its merchantability, or its 321 or ALEX PLUS® SA-167 834
fitness for a particular purpose. All recommendations, directions, and suggestions for its use are consistent with our testing and research for a S50 800 ALEX Fast Dry™ Polyseamseal AC-20+ Sonolac TremGlaze SA1100
variety of applications, but no promises, guarantees, or warranties are being made regarding its use, whether or not consistent with the directions, DYNAFLEX 230® Pro-Stik TremPro 655
LEED is a registered trademark of the U.S. Green Building Council.
or its effectiveness for any given application. Users of this product should do so in compliance with all applicable laws and regulations. User of this
product should conduct its own field test, to assure results.
4361 Firestone Blvd. South Gate, CA 90208 | Toll Free: (888) 295-4531 | Direct: (323) 968-2031 | Fax: (323) 336-8307 | fhc-usa.com LIT0225 07.15.22
Limitations of Warranties
The terms and conditions specified in FHC publications apply to purchase price. It is important to note that no salesperson, agent,
all products and materials. FHC recommendations regarding these employee, or representative of FHC has the authority to alter or
products are based on reliable tests and examinations. However, expand upon the terms of this warranty.
FHC does not guarantee or warrant the accuracy or completeness
of these recommendations. It is the sole responsibility of the user Please note that FHC shall not be held responsible for any special,
to determine the suitability of FHC’s products or materials for indirect, consequential, or incidental damages or loss, including
each intended use, and the user assumes all risks and liability but not limited to loss of profits or revenues, economic losses, or
associated with their use. loss of use, whether statutory or based on theories of contract or
tort. This warranty and the terms specified herein constitute the
Regarding defects in material or workmanship, FHC provides entirety of the agreement between the parties and supersede any
a warranty. Within thirty (30) days of receiving the product or other agreements, express or implied, including any relating to
material, if any portion is proven to be defective upon inspection, merchantability or fitness for a particular purpose.
FHC agrees to replace it or, at their sole discretion, refund the
Visit fhc-usa.com to search for
Sealants FRAMELESS HARDWARE COMPANY LLC
2323 Firestone Blvd. South Gate, CA 90280
Enter the Item Number or scan QR code with Toll Free: (888) 295-4531 | Direct: (323) 968-2031
your smartphone for complete product details WS03
Fax: (323) 336-8307 | fhc-usa.com