Page 33 - FSH24R Frameless Shower Door Hardware and Supplies

FRAMELESS SHOWER DOOR HINGES SECTION 1
Valore HD 2-5/8"

Heavy-Duty Frameless
Shower Door Hinges

- For 3/8” to 1/2” Tempered Glass H E AV I E R
- For Heavier and Wider Doors, A N D W I D E R D O O R S
Maximum 145 Pound Rating
- Square Profile Wall Mount and F O R
180 Degree Glass-to-Glass Models
- Seven Popular Finishes 4-3/8" ITEM NO. VAL03XX
Wall Mount Offset
- Self-Centering Within 15 Degrees Back Plate Hinge
Standard Closing Position
of Closing Position
- Solid Brass Construction
- Commonly Used in Residential Bath
and Commercial Hotel Applications

2-5/8"
2-5/8"

4-3/8"
4-3/8"

ITEM NO. VALF1XX ITEM NO. VAL180XX
Wall Mount 180 Degree
Full Back Plate Hinge Glass-to-Glass Hinge
Standard Closing Position Standard Closing Position

Available Finishes * Available On Select Models Only
NOTE: Dimensions
Shown are Similar for All
Valore HD Series Hinges.

CH BN 0RB MB PN SB BBRZ
POLISHED BRUSHED OIL RUBBED MATTE POLISHED SATIN BRUSHED SHOWER HINGE TEMPLATE PROFESSIONAL GRADE
CHROME NICKEL BRONZE BLACK NICKEL* BRASS* BRONZE* VALORE HD 2-1/2"
Wall Mount Hinge
ITEM NO. VALF1
WIDTH 40" MAX
SPECIFICATIONS
Glass Sizes: 3/8" or 1/2" (10 or 12 mm) Tempered Glass Only
Construction: Solid Brass 2-HINGES MAX 145
Closing Type: Full Rotation and Self-Centering
When Within 15 Degrees of Closed Position

Cutout Required: Cutout No. SD48
Includes: Hinge body, glazing gaskets, mounting screws, allen
head/phillips head cover plate screws, and fabrication template.
MAXIMUM CAPACITY: Cut-Out Required: Specific GASKET SPECIFICATIONS: 4-3/8" VALORE HD 4-3/8" SEE TEMPLATE ON BACK DO NOT MEASURE / SCALE DRAWING
LBS
Use: Residential Bath and Commercial Hotel Applications

PROFESSIONAL GRADE
Refer to Dimensions Shown
SHOWER HINGE TEMPLATE
Cut-Out Templates Available
to Ensure Accuracy
For 3/8" (10 mm) Glass: Use One Thick Gasket On Each Side
Wall Mount Hinge
For 1/2" (12 mm) Glass: Use One Thin Gasket On Each Side
ITEM NO. VALF1
2-1/16"
USE DIMENSIONS SHOWN
GLASS INSTRUCTIONS:
Only use tempered safety glass. To prevent damage to the hinge finish
2-5/8"
IMPORTANT INFORMATION:
3/8" (10 mm) GLASS 1/2" (12 mm) GLASS at fhc-usa.com. during installation, do not use power tools when installing these hinges. CARE & CLEANING GUIDELINES: 7/16" 3/16" (5 mm) EDGE OF GLASS 1-11/16" F O R H E AV I E R A N D W I D E R D O O R S (53 mm) (10 mm) 3/8" IMPORTANT: Cutout No. SD48
The Valore Series hinge has a dual degree pivot pin. It comes factory set
Measure from Finished
at 90 degrees for normal door closing applications. There is also a secondary
(43 mm)
Edge of Glass
setting on the hinge pivot pin that can be field adjusted to allow an additional
For best results, keep the following recommendations in mind when caring for your FHC shower door hardware.
5 degrees of closing for jobs that require a firmer positive position against a
Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh
jamb or seal.
cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will
MAXIMUM DOOR Approx. 5 lb/ft 2 OR Approx. 6.4 lb/ft 2 become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning
the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely
with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle,
cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.
MAINTENANCE:
1-7/16"
CAPACITY Includes: Hinge, Glazing MAXIMUM DOOR 145 LBS. (65 kg) WEIGHT 3/8" (10 mm) GLASS 40" (1016 mm) WIDTH 145 LBS. (65 kg) WEIGHT 1/2" (12 mm) GLASS 40" (1016 mm) WIDTH FHC’s hinges come factory greased for a silent, hassle-free experience. (73 mm) 2-7/8" C L CUT OUT Diameter Holes 3/4" (19 mm) F O R H E AV I E R A N D W I D E R D O O R S
(36.5 mm)
If there is any noticeable squeaking that occurs after installation it is recommended
to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot
CAPACITY
location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning
grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge
USING 2 HINGES
is disassembled during maintenance, use a small amount of white lithium grease
3-1/4"
NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.
to lubricate the interior hinge components.
(83 mm)
DOOR WEIGHT DOOR WIDTH Gaskets, Wall Mounting FRAMELESS HARDWARE COMPANY 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com (36.5 mm) 1-7/16" FRAMELESS HARDWARE COMPANY TEMPERED GLASS
THE GLAZING SUPPL Y COMP ANY
USE ONLY
FHC-USA.COM
LIT0046 12.12.19 PG 1 OF 2
MONOLITHIC
Screws, Allen Head/Phillips FRAMELESS HARDWARE COMPANY
USING 2 HINGES 145 LBS. (65 kg) 40" (1016 mm) (5 mm) 3/16" THE GLAZING SUPPL Y COMP ANY For Technical Support
Call Toll Free in the U.S.
Head Cover Plate Screws, EDGE OF GLASS
framelesshardware.com
(888) 295-4531
NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges. and Fabrication Template. FRAMELESS HARDWARE COMPANY 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com FRAMELESS HARDWARE COMPANY
THE GLAZING SUPPL Y COMP ANY
FHC-USA.COM
LIT0046 12.12.19 PG 2 OF 2
FRAMELESS HARDWARE COMPANY
THE GLAZING SUPPL Y COMP ANY
framelesshardware.com
XX = FINISH
visit fhc-usa.com to search for
Valore P.O. Box 1906 South Gate, CA 90280
Toll Free: (888) 295-4531 | Direct: (323) 968-2031
Enter the Item Number or scan QR code with
your smartphone for complete product details Fax: (323) 336-8307 | fhc-usa.com 031