The list name can't be left blank
View Our Catalog Library

Downloadable Documents

Item No
PATGS01

FHC Patriot Grande Series Top or Bottom Beveled Pivot Hinge

Unit Of MeasureEA
Only %1 left

Existing Customers Can Sign in to See Pricing and Place Orders
New to FHC? Request an Account
For Non-Related Industries Dealer Referral

Features, Advantages, and Benefits

  • Beveled Top or Bottom Mount Heavy Duty Pivot Hinge
  • Designed For 1/2" (12 mm) Tempered Glass
  • Many Popular Finishes to Select From
  • Self-Centering within 15 Degrees of Closing Position
  • Commonly used in Residential Bath and Commercial Hotel Applications
  • Optional 5 Degree Pivot Pin Allows Firmer, Positive Close Position Against Jamb/Seal
Request a Quote
Description

Glass Specifications

MAXIMUM DOOR CAPACITY 1/2" (12 mm) GLASS
Approx. 6.4 lb./ft²
DOOR WEIGHT DOOR WIDTH
Using 2 Hinges 145 LBS (66 kg) 36" (914 mm)

NOTE: Do Not Exceed either maximum weight or width when choosing proper quantity of hinges.

Gasket Specifications

For 1/2" (12 mm) Glass: Use one thick gasket and one thin gasket on each side.

Glass Instructions

Only use tempered safety glass. To prevent damage to the hinge finish during installation, do not use power tools when installing these hinges.

Overview

The Patriot Grande Series Pivot Hinge has a dual degree pivot pin. It comes factory set at 90 degrees for normal door closing applications. There is also a secondary setting on the hinge pivot pin that can be field adjusted to allow an additional 5 degrees of closing for jobs that require a firmer positive position against a jamb or seal.

Care & Cleaning Guidelines

For best results, keep the following recommendations in mind when caring for your FHC shower door hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.

Maintenance

FHC's hinges come factory greased for a silent, hassle-free experience. If there is any noticeable squeaking that occurs after installation it is recommended to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge is disassembled during maintenance, use a small amount of white lithium grease to lubricate the interior hinge components.

Material/Construction

Solid Brass

More Information
Product Name FHC Patriot Grande Series Top or Bottom Beveled Pivot Hinge
Item No PATGS01
Weight 2.000000
Catalog Page FSH24 p. 42
Minimum Order Quantity 1

WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov

© Frameless Hardware Company, LLC. All rights reserved.