Item No
D1811
FHC Single 1-1/4" Steel Ball Bearing Roller - F-Tab Style - Adjustable
Unit Of Measure PK
Features, Advantages, and Benefits
- 1-1/4 in. concave (grooved) steel roller
- Ball bearing
- F-tab housing with rear adjust
- When the corner screw passes through the F tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together
- Housing is 3/4 in. wide, 1-3/16 in. tall and 2-5/16 in. long with a dimple width of 7/8 in
- Used on metal framed patio doors
- For further dimensional information, please see the line drawing
Overview
This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 3/4 in. wide and 1-3/16 in. tall with a dimple width of 7/8 in.. Used by Northrup series 600 doors and a variety of other patio door manufacturers.
| Product Name | FHC Single 1-1/4" Steel Ball Bearing Roller - F-Tab Style - Adjustable |
|---|---|
| Item No | D1811 |
| Compare To | D1811 |
| Minimum Order Quantity | 1 |
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov