Item No
D1815
FHC Sliding Door Roller Assembly 1-1/4" Nylon Ball Bearing
Unit Of MeasurePK
Case Quantity6
Features, Advantages, and Benefits
- Used By King Mirror And A Variety Of Other Patio Door Manufacturers
- When The Corner Screw Passes Through The F-Tab The Assembly Is Captured By The Side Stile And Bottom Rail As The Screw Draws The Two Sides Together
- 1-1/4 In. Diameter Ball Bearing Roller
- Stamped Steel Housing And Nylon Roller
- F-Tab Housing
- Rear Adjusting Screw
- A Phillips Head Screwdriver Is Required For Installation
- For Further Dimensional Information, Please See The Line Drawing
Overview
This is a F-tab patio door roller assembly with a 1-1/4 in. concave nylon ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide with a 3/4 in. flare, 1-1/16 in. tall and a rear adjusting screw. Used by King Mirror and a variety of other patio door manufacturers.
| Product Name | FHC Sliding Door Roller Assembly 1-1/4" Nylon Ball Bearing |
|---|---|
| Item No | D1815 |
| Case Quantity | 6 |
| Compare To | D1815 |
| Minimum Order Quantity | 1 |
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov