Item No
D1840
FHC 1" Steel Ball Bearing Sliding Door Roller Assembly - Lupton
Unit Of MeasurePK
Case Quantity6
Features, Advantages, and Benefits
- Used by Lupton and a variety of other patio door manufacturers
- When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together
- 1 in. diameter concave ball bearing roller
- Stamped steel housing and roller
- Rear adjusting screw
Overview
This is an F-tab patio door roller assembly with a 1 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 in. wide and 1-3/16 in. tall with a 7/8 in. dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.
| Product Name | FHC 1" Steel Ball Bearing Sliding Door Roller Assembly - Lupton |
|---|---|
| Item No | D1840 |
| Case Quantity | 6 |
| Compare To | D1840 |
| Minimum Order Quantity | 1 |
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov