Item No
D1845
FHC 1-1/4" Steel - Sliding Door Tandem Roller Assembly With F-Tab (Single Pack)
Unit Of MeasurePK
Case Quantity6
Features, Advantages, and Benefits
- Used by a variety of sliding patio door manufacturers
- When the corner screw passes through the F tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together
- 1-1/4 in. diameter tandem concave rollers
- Stamped steel with steel ball bearing
- Rear adjustment screw
Overview
This is an F-tab tandem roller assembly with two 1-1/8 in. concave steel ball bearing rollers installed. When the corner screw passes through the F-tab, the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable stamped steel housing is 11/16 in. wide with a 13/16 in. flare, 1-1/8 in. tall and 3-1/8 in. long. Used by a variety of sliding patio door manufacturers.
| Product Name | FHC 1-1/4" Steel - Sliding Door Tandem Roller Assembly With F-Tab (Single Pack) |
|---|---|
| Item No | D1845 |
| Case Quantity | 6 |
| Compare To | D1845 |
| Minimum Order Quantity | 1 |
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov