Item No
D1584
FHC 1-1/4" Steel Ball Bearing Sliding Door Roller Assembly - For Northrup (Single Pack)
Unit Of Measure PK
Case Quantity 6
Features, Advantages, and Benefits
- Used by Northrup and a variety of sliding patio door manufacturers
- When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together
- 1-1/4 in. diameter concave ball bearing roller
- Stamped steel housing and steel rollers
- Used on metal framed sliding patio doors
- Easy to install
Overview
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 in. wide and 1-3/16 in. tall with a dimple width of 7/8 in. used by Northrup and a variety of sliding patio door manufacturers.
| Product Name | FHC 1-1/4" Steel Ball Bearing Sliding Door Roller Assembly - For Northrup (Single Pack) |
|---|---|
| Item No | D1584 |
| Weight | 0.000000 |
| Case Quantity | 6 |
| Compare To | D1584 |
| Minimum Order Quantity | 1 |
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov