Item No
D1722
FHC 1-1/2" Steel - Sliding Door Tandem Roller Assembly - For Rolleze Glass Doors (Single Pack)
Unit Of MeasurePK
Case Quantity6
Features, Advantages, and Benefits
- Used by Rolleze Glass, Rylock and a variety of sliding patio doors
- Insert the roller into the bottom rail without the screw, replace the side stile, as the screw draws the roller's bottom backside tighter, the design causes the far end to rotate downward causing the roller to lift the door to the desired height
- 1-1/2 in. diameter ball bearing roller
- Galvanized stamped steel construction and steel roller
- Used on metal framed sliding patio doors
- Allows smooth sliding operation of patio door
Overview
This is a unique housing patio door roller assembly. It is 23/32 in. wide, 1-7/8 in. tall and 2-1/8 in. long with a 1-1/4 in. diameter steel ball bearing roller. To install, remove the screw from the back and insert the assembly into the bottom rail end. Replace side stile, insert screw and into assembly. As the screw draws the roller's backside tighter, the design causes the front end to rotate downward and the door to lift to the desired height. Used by Rolleze or Rylock.
| Product Name | FHC 1-1/2" Steel - Sliding Door Tandem Roller Assembly - For Rolleze Glass Doors (Single Pack) |
|---|---|
| Item No | D1722 |
| Case Quantity | 6 |
| Compare To | D1722 |
| Minimum Order Quantity | 1 |
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov